In many industries, there is the need to connect a lot of wires. The automotive industry is one of them. Take a look at your car. It has lamps and other devices powered by electricity. The electrical system of your auto is quite sophisticated. It consists of a battery and some electric machines. All these devices must be interconnected safely and reliably. While soldering is a way to make such connections, it is not a viable option to connect multiple cables.
In such situations, it is much more practical to use electrical connectors. There are different types of wire connectors, which can be purchased at specialized shops like. At first, one may think that using a wire connector isn’t much better than soldering. However, there are some clear advantages such as: Also check– Laptop batteries HP
- More durability. Instead of soldering, one can connect a wire to a tap or terminal (ring, fork, etc.). One can do it with a special crimping tool. This procedure protects the wire or cable from moisture and dirt. Soldering doesn’t offer this benefit;
- More reliability. Crimping a wire creates a solid and reliable connection. Soldering degrades over time, which may lead to a connection failure;
- Easier procedure. While soldering a single cable to a pin may not be a big problem, a multi-cable connection is more challenging. In this case, crimping cables for multi-wire connectors is easier and more time-efficient.
As seen, in many industrial scenarios, using electrical multi connectors is the best solution. Thus, if needed, offers all types of electrical connectors for home and industrial applications. If you don’t know how to use a wire connector, read on. There are some simple directions below.
How to Use an Electrical Connector
There are many terminals and pins to which you can crimp a cable. The type you use depends on the plug where you want to connect the cable. If you don’t know what type of terminal is most convenient for your application, you can check the online catalog at. You surely will find the right connector on that site.
Once you have chosen the type of connector, the crimping process is quite simple. You just need to remove the insulation of the cable. Put the naked cable in its corresponding slot in the connector. Then, use the crimping tool to apply pressure to the connector such that the cable is firmly attached.
If you need a waterproof connection, then you need to use heat shrink material to seal the crimped connection. This material is a piece of tubing, which is inserted on the cable previous to crimping. When the cable is attached, you cover the connection with the tubing and apply some heat to it. As a result, the tubing will shrink, thereby sealing hermetically the connection.
At, onhaxme.com you can buy all you need for these connections: wire crimping tools, heat shrink material, and all types of electrical connectors.